In the United Kingdom, Chartered Engineer (CEng) is an advanced professional qualification for engineers that encompasses both academic engineering qualifications and proven professional competence, whose holders are registered with the UK's regulatory body for the engineering profession, the Engineering Council.
Chartered Engineers are required to hold a Master's degree in an appropriate engineering discipline, or have achieved an education academically equivalent to a master's degree in an appropriate engineering discipline, attained through an appropriate combination of qualifications and learning, subject to a stringent academic assessment.
An important distinction is that CEng is not merely an academic qualification; it is an academically and professionally assessed qualification, demonstrating significant engineering competence and commitment beyond the Master's-level academic requirements.
Academic engineering education alone does not establish professional engineering competence or demonstrate the ability to apply advanced engineering and technological knowledge in professional practice. Academic qualifications establish the required engineering knowledge and understanding, which is provided by the Master's-level academic foundation. This distinction reflects the applied nature of engineering. Professional competence requires the proven application of that advanced knowledge to complex engineering and technological challenges. Such competence must be independently assessed by a competent professional authority, against established and recognised educational and professional benchmarks, including assessment of knowledge, professional judgement, leadership and responsibility.
The appropriate professional competencies for CEng must be demonstrated through education, further training, and work experience. Assessment is then undertaken by the relevant Professional Engineering Institution (PEI) through a rigorous and stringent peer review process involving academics and experienced professional engineers. Significant experience is required which invariably spans several years of postgraduate professional practice. The competencies required for CEng are defined in the UK Standard for Professional Engineering Competence. Formal, non-formal and informal learning can be assessed.
The title Chartered Engineer is protected in the UK under law by means of the Engineering Council's royal charter and bye-laws. As of 2019 there are approximately 180,000 engineers registered as a Chartered Engineer. Chartered Engineers are registered through Professional Engineering Institutions (PEIs) licensed by the Engineering Council which are relevant to their industry or specialism.
The total process of becoming a Chartered Engineer, including an MEng, can take at least 8 years, but it typically takes 10-12 years or longer to satisfy all of the competency requirements.
A Chartered Engineer holds the highest professional qualification in engineering and is trusted to take full responsibility for the development and application of engineering across areas including research, design, leadership, management, education and more. The Chartered Engineer title is recognised as the “gold standard” and a mark of excellence in the engineering profession. CEng holders are recognised as being among the technological elite.
Many engineering tasks covered by UK legislation specify Chartership as a requirement of the persons undertaking them. For example The Road Tunnel Safety Regulations 2007 require that for inspections "The person appointed as the inspection entity must be a Chartered Engineer or headed by a Chartered Engineer". Others require chartered engineers be registered with a particular institution, for example The Energy Efficiency (Private Rented Property) (England and Wales) Regulations 2015 require assessments be carried out by a "chartered engineer...who is registered by the Institution of Civil Engineers".

History
In the 19th century engineering as a profession was becoming prolific and various disciplines (principally civil, mechanical and electrical) organised to form institutions to further the interests of their members and the industry as a whole. At this time, each institution began to implement entry examinations for membership to ensure a minimum standard of competence of their members. In the Institution of Mechanical Engineers (IMechE), for example, candidates for associate membership would be expected to sit a general knowledge paper, a three-hour paper on applied mathematics, a three-hour paper on physics and chemistry and two three-hour papers elected from the following list: materials, steam engines, internal combustion engines, hydraulics, “electrotechnics”, the theory of machines, machine design and metallurgy. Membership of an engineering institution quickly became a mark of quality and would give employers confidence in the competency of its members. Various institutions sought royal charters to formalise their position and the members became engineers by charter, or 'chartered engineers' for that institutions discipline. The first was in 1828 when the Institute of Civil Engineers was awarded its royal charter (awarding Chartered Civil Engineer). On 22 April 1930 King George V signed the IMechE's royal charter allowing members to refer to themselves as Chartered Mechanical Engineers. By the mid-1950s, a significant demand for a central body to set the standards for education and training and to represent the wider profession had arisen. This led to the creation of the Joint Council of Engineering Institutions, established in 1964, that was later known as the Council of Engineering Institutions (CEI). This body was empowered to imbue the title of Chartered Engineer to elected members of PEIs. Despite attempts in the 1970s to replace the title with REng (Registered Engineer), the title of Chartered Engineer remains the de facto mark of the professional engineer in the UK and Ireland.

Qualification requirements
To become chartered, the Engineering Council require engineers meet requirements set out in The UK Standard for Professional Engineering Competence and Commitment (UK-SPEC) which broadly fall into two categories, academic qualification and initial professional development (IPD).

Academic qualifications
The UK-SPEC denotes the following academic qualification requirements (for the 'traditional' pathway):

An accredited bachelor's degree with honours in engineering or technology, plus either an appropriate master's degree or engineering doctorate accredited by a licensee, or appropriate further learning to masters level
An accredited integrated Master of Engineering (MEng) degree
An accredited bachelors degree with honours in engineering or technology started before September 1999
Equivalent qualifications or apprenticeships accredited or approved by a licensee, or at an equivalent level in a relevant national or international qualifications framework

Initial Professional Development
Initial Professional Development (IPD) is acquired through work place learning. The UK-SPEC splits IPD into five key competencies:
Competency A. Knowledge and understanding
Chartered Engineers shall use a combination of general and specialist engineering knowledge and understanding to optimise the application of advanced and complex systems.
Competency B. Design, development and solving engineering problems
Chartered Engineers shall apply appropriate theoretical and practical methods to the analysis and solution of engineering problems.
Competency C. Responsibility, management and leadership
Chartered Engineers shall demonstrate technical and commercial leadership.
Competency D. Communication and interpersonal skills
Chartered Engineers shall demonstrate effective communication and interpersonal skills.
Competency E. Personal and professional commitment
Chartered Engineers shall demonstrate a personal commitment to professional standards, recognising obligations to society, the profession and the environment.
The five key competencies encompass 17 detailed sub-competencies and commitment requirements (A1–E5), covering the knowledge, problem-solving, leadership, communication and professional commitments expected of Chartered Engineers; see the current UK-SPEC for the full requirements.

Requirements specific to institutions
The Engineering Council do not directly register Chartered Engineers. This task is delegated to Professional Engineering Institutions (PEIs). In addition to the key competencies set in the UK-SPEC, the PEI may have additional requirements for election to membership. For example, the Nuclear Institute (NI) requires demonstration of the key competencies, but also of the Nuclear Delta. According to the NI, the nuclear delta differentiates nuclear professionals from professionals in other fields and institutions. The Nuclear Delta is defined by three core elements, which capture what is unique, special and different about the nuclear industry.

Nuclear Safety Culture
Nuclear Security Culture
Nuclear Technology & Safety
The Institution of Structural Engineers (IStructE), as a professional structural engineering institution licensed by the Engineering Council to assess candidates for CEng registration, applies additional discipline-specific assessment requirements. This includes a seven-hour examination and a Professional Review Interview. The examination assesses the candidate's ability to develop effective, viable and sustainable structural solutions, including design appraisal, structural calculations, general arrangement drawings, carbon calculations and a method statement for safe construction.

Maintenance requirements
The Engineering Council requires demonstration of commitment and continued professional development (CPD) for on-going registration as a chartered engineer. The Engineering Council sets out basic requirements and similar to IPD, CPD may be further enhanced by individual PEIs. The general requirements are:
Take ownership of their learning and development needs, and develop a plan to indicate how they might meet these, in discussion with their employer, as appropriate.

Undertake a variety of development activities, both in accordance with this plan and in response to other opportunities which may arise.
Record their CPD activities.
Reflect upon what they have learned or achieved through their CPD activities and record these reflections.
Evaluate their CPD activities against any objectives which they have set and record this evaluation.
Review their learning and development plan regularly following reflection and assessment of future needs.
Support the learning and development of others through activities such as mentoring, and sharing professional expertise and knowledge.

Designatory lettering
Chartered Engineers are entitled to use the post-nominals, CEng, after names as a means of denoting their status with the Engineering Council. This is written after honours, decorations and academic/university, but before letters denoting membership of professional engineering institutions. When a Chartered Engineer has more than one institution membership conferring designatory letters, the institution through which the holder is registered as a Chartered Engineer appears immediately after CEng, with other memberships following in order of the institution's foundation dates.

International equivalence
The level of academic education required for registration as a Chartered Engineer in the UK is comparable to that required in many continental European countries where master's-level education is required for registration as a professional engineer. The Washington Accord, signed by the Engineering Council in 1989, recognises the substantial equivalence of the learning outcomes of accredited professional engineering education programmes among signatories. Recognition under the Washington Accord is outcome-based rather than dependent on the length of engineering programmes.
The Chartered Engineer standard is expanding internationally, with formal recognition and registration arrangements now extending beyond the United Kingdom to countries including Ireland, the Netherlands, Spain, Portugal, Italy, the United States and New Zealand.
In the Republic of Ireland, the Chartered Engineer (CEng) title is awarded by Engineers Ireland, which is the sole authority empowered to award the title in the country. The UK Engineering Council and Engineers Ireland have an Admissions Pathways Agreement under which their competency-based professional registration assessments are recognised as substantially equivalent, providing a streamlined route for recognition of professionally registered Chartered Engineers between the United Kingdom and Ireland.
In the Netherlands, the UK Engineering Council and the Royal Netherlands Society of Engineers (KIVI) have an Admissions Pathways Agreement, signed in 2023, which provides for mutual recognition and transfer of professional registration. UK Chartered Engineers (CEng) and Incorporated Engineers (IEng) may apply for registration in the Netherlands through the agreement, and corresponding KIVI registrations may be transferred to the UK.
Chartered Engineers are entitled to register through the European Federation of National Engineering Associations as a European Engineer and use the pre-nominal of EUR ING.

Bodies qualified to register Chartered Engineers
The body that maintains the UK's register of Chartered Engineers is the Engineering Council. Authority to register Chartered Engineers is delegated to licensed Professional Engineering Institutions (PEIs):

Institute of Acoustics
Royal Aeronautical Society
Institution of Agricultural Engineers
British Computer Society
Chartered Institute of Information Security
Chartered Association of Building Engineers
Chartered Institution of Building Services Engineers
Chartered Institution of Highways and Transportation
Institute for Systems Engineering (UK chapter of INCOSE)
Institute of Cast Metals Engineers
Institution of Chemical Engineers
Institution of Civil Engineers
Energy Institute
Institution of Engineering and Technology
Institution of Engineering Designers
Institute of Explosive Engineers (IExpE)
Institution of Fire Engineers
Institution of Gas Engineers and Managers
Institute of Healthcare Engineering and Estate Management
Institute of Highway Engineers
Institution of Lighting Professionals
Institute of Marine Engineering, Science and Technology
Institute of Materials, Minerals and Mining
Institute of Measurement and Control
Institution of Mechanical Engineers
Royal Institution of Naval Architects
British Institute of Non-Destructive Testing
Institution of Nuclear Engineers
Society of Operations Engineers
Institute of Physics
Institute of Physics and Engineering in Medicine
Institution of Railway Signal Engineers
Institution of Royal Engineers
The Safety and Reliability Society
Institution of Structural Engineers
Chartered Institution of Water and Environmental Management
Institution of Water Officers
The Welding Institute
Chartered Institution of Civil Engineering Surveyors (CICES)
The Permanent Way Institution (PWI)
Some of these institutions also register Incorporated Engineers and Engineering Technicians. There are other Engineering Council UK licensed member institutions that register Incorporated Engineers and Engineering Technicians, but do not register Chartered Engineers.
Incorporated Engineer is roughly equivalent to North American Professional Engineer designations and Chartered Engineer (CEng) is set at a higher level.

See also
Chartered Chemist
Chartered Environmentalist
Chartered IT Professional
Chartered Physicist
Chartered Mathematician
Chartered Scientist
European Engineer (EUR ING)
Institution of Engineers of Ireland
KIVI Professional Titles
Master of Engineering
Master of Science in Engineering
Professional Engineer
SQEP

References

External links
A. & C. Black Staff. (2002). Titles and Forms of Address, 21st edition. A. & C. Black. ISBN 0-7136-6265-4
Engineering Council UK. ECUK Institution Details. Retrieved 13 July 2007
Engineering Council UK. FEANI Registration and the EurIng Title. Retrieved 13 July 2007
Engineering Council UK. Register Sections. Retrieved 13 July 2007
Institution of Engineering and Technology. Use of designatory letters. Retrieved 13 July 2007
Institution of Engineering and Technology. The Chartered Engineer Qualification. Retrieved 16 March 2015
Engineering and Technology Board (UK)
Engineering Council UK
SCENTA (UK)